RCA adapter.

I am using this fostex VC8 as an analog /digital converter and ADAT TX/RX from the Scope card which will do the DSP processing.

I had a few choices.

1. run it "as is" outside the case with lots more wires all over the place.
2. Run it in the case with 12 seperate RCA plugs and their wires taking up space inside the case and making a mess.
   
3. In the case, Desolder the RCA adapters and run wires directly from the board,
4. In the case, Make an adapter so i can have only 2 ribbon cables running to the RCA jacks.and the VC8 is untouched so i could use it again.
   

I chose 4. it is just some 1/8 copper rod cut to length and soldered to the board. It worked out surprisingly well!